Q: I have multiple boards on a panel (step and repeated in the netlist) and they have a common plane net. What am I doing wrong?

A: If you do your step and repeat in FixMaster or make a split layer (GS1) for each board your results will be separate nets.

Q: I have multiple planes and I’ve made an outline for each split. Why do I still only have one net for all of these split planes?

A: You must use a different DCode for each split!

Q: The problem is dropping our smallest pin (P1). We get many breakout errors. The two layer pins (P2 & P3) appear to function normally.

A: You need to optimize the size of your drills. We recommend you download the latest update. In this update we take the guess work out of drilling fixtures!

Q: Why are all the nets #0 when I load my netlist?

A: When loading your netlist from CAMMaster you should have your Import Netlist setting set to "numeric". If you are loading a netlist from your CAD system and/or using Netconvert you need to load it as a alphanumeric.

Q:  How do I number the step and repeated panels in FixMaster?

A:  Put a window around the single part, press CTRL Minus. Do this for each additional part.